/* * asus_acpi.c - Asus Laptop ACPI Extras * * * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * * The development page for this driver is located at * http://sourceforge.net/projects/acpi4asus/ * * Credits: * Pontus Fuchs - Helper functions, cleanup * Johann Wiesner - Small compile fixes * John Belmonte - ACPI code for Toshiba laptop was a good starting point. * �ic Burghard - LED display support for W1N * */ #include #include #include #include #include #include #include #include #include #define ASUS_ACPI_VERSION "0.30" #define PROC_ASUS "asus" //the directory #define PROC_MLED "mled" #define PROC_WLED "wled" #define PROC_TLED "tled" #define PROC_BT "bluetooth" #define PROC_LEDD "ledd" #define PROC_INFO "info" #define PROC_LCD "lcd" #define PROC_BRN "brn" #define PROC_DISP "disp" #define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver" #define ACPI_HOTK_CLASS "hotkey" #define ACPI_HOTK_DEVICE_NAME "Hotkey" #define ACPI_HOTK_HID "ATK0100" /* * Definitions for Asus EeePC : begin */ #define PROC_INIT "init" #define PROC_CAMERA "camera" #define PROC_CARDR "cardr" #define PROC_CPUFV "cpufv" #define PROC_HDPS "hdps" #define PROC_MODEM "modem" #define PROC_WLAN "wlan" #define PROC_USB "usb" #define NOTIFY_WLAN_ON 0x10 #define EEEPC_HOTK_NAME "Asus EEEPC Hotkey Driver" #define EEEPC_HOTK_CLASS "hotkey" #define EEEPC_HOTK_DEVICE_NAME "Hotkey" #define EEEPC_HOTK_HID "ASUS010" enum { DISABLE_ASL_WLAN = 0x0001, DISABLE_ASL_BLUETOOTH = 0x0002, DISABLE_ASL_IRDA = 0x0004, DISABLE_ASL_CAMERA = 0x0008, DISABLE_ASL_TV = 0x0010, DISABLE_ASL_GPS = 0x0020, DISABLE_ASL_DISPLAYSWITCH = 0x0040, DISABLE_ASL_MODEM = 0x0080, DISABLE_ASL_CARDREADER = 0x0100 }; typedef enum { CM_ASL_WLAN = 0, CM_ASL_BLUETOOTH, CM_ASL_IRDA, CM_ASL_1394, CM_ASL_CAMERA, CM_ASL_TV, CM_ASL_GPS, CM_ASL_DVDROM, CM_ASL_DISPLAYSWITCH, CM_ASL_PANELBRIGHT, CM_ASL_BIOSFLASH, CM_ASL_ACPIFLASH, CM_ASL_CPUFV, CM_ASL_CPUTEMPERATURE, CM_ASL_FANCPU, CM_ASL_FANCHASSIS, CM_ASL_USBPORT1, CM_ASL_USBPORT2, CM_ASL_USBPORT3, CM_ASL_MODEM, CM_ASL_CARDREADER, CM_ASL_LID } cm_asl_t; const char *cm_getv[]= {"WLDG", NULL, NULL, NULL, "CAMG", NULL, NULL, NULL, NULL, "PBLG", NULL, NULL, "CFVG", NULL, NULL, NULL, "USBG", NULL, NULL, "MODG", "CRDG", "LIDG"}; const char *cm_setv[]= {"WLDS", NULL, NULL, NULL, "CAMS", NULL, NULL, NULL, "SDSP", "PBLS", "HDPS", NULL, "CFVS", NULL, NULL, NULL, "USBG", NULL, NULL, "MODS", "CRDS", NULL}; static uid_t eeepc_uid; static gid_t eeepc_gid; module_param(eeepc_uid, uint, 0); MODULE_PARM_DESC(eeepc_uid, "UID for entries in /proc/acpi/eeepc.\n"); module_param(eeepc_gid, uint, 0); MODULE_PARM_DESC(eeepc_gid, "GID for entries in /proc/acpi/eeepc.\n"); static unsigned int init_flag; static struct proc_dir_entry *eeepc_proc_dir; /* * This is the main structure, we can use it to store useful information * about the hotk device */ struct eeepc_hotk { struct acpi_device *device; //the device we are in acpi_handle handle; //the handle of the hotk device unsigned int cm_supported; //the control method supported status of this BIOS. unsigned short event_count[128]; //count for each event }; /* The actual device the driver binds to */ static struct eeepc_hotk *ehotk; /* * The hotkey driver declaration */ static int eeepc_hotk_add(struct acpi_device *device); static int eeepc_hotk_remove(struct acpi_device *device, int type); static struct acpi_driver eeepc_hotk_driver = { .name = "eeepc_acpi", .class = EEEPC_HOTK_CLASS, .ids = EEEPC_HOTK_HID, .ops = { .add = eeepc_hotk_add, .remove = eeepc_hotk_remove, }, }; /* * Definitions for Asus EeePC : end */ /* * Some events we use, same for all Asus */ #define BR_UP 0x10 #define BR_DOWN 0x20 /* * Flags for hotk status */ #define MLED_ON 0x01 //mail LED #define WLED_ON 0x02 //wireless LED #define TLED_ON 0x04 //touchpad LED #define BT_ON 0x08 //internal Bluetooth MODULE_AUTHOR("Julien Lerouge, Karol Kozimor"); MODULE_DESCRIPTION(ACPI_HOTK_NAME); MODULE_LICENSE("GPL"); static uid_t asus_uid; static gid_t asus_gid; module_param(asus_uid, uint, 0); MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus.\n"); module_param(asus_gid, uint, 0); MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n"); /* For each model, all features implemented, * those marked with R are relative to HOTK, A for absolute */ struct model_data { char *name; //name of the laptop________________A char *mt_mled; //method to handle mled_____________R char *mled_status; //node to handle mled reading_______A char *mt_wled; //method to handle wled_____________R char *wled_status; //node to handle wled reading_______A char *mt_tled; //method to handle tled_____________R char *tled_status; //node to handle tled reading_______A char *mt_ledd; //method to handle LED display______R char *mt_bt_switch; //method to switch Bluetooth on/off_R char *bt_status; //no model currently supports this__? char *mt_lcd_switch; //method to turn LCD on/off_________A char *lcd_status; //node to read LCD panel state______A char *brightness_up; //method to set brightness up_______A char *brightness_down; //guess what ?______________________A char *brightness_set; //method to set absolute brightness_R char *brightness_get; //method to get absolute brightness_R char *brightness_status; //node to get brightness____________A char *display_set; //method to set video output________R char *display_get; //method to get video output________R }; /* * This is the main structure, we can use it to store anything interesting * about the hotk device */ struct asus_hotk { struct acpi_device *device; //the device we are in acpi_handle handle; //the handle of the hotk device char status; //status of the hotk, for LEDs, ... u32 ledd_status; //status of the LED display struct model_data *methods; //methods available on the laptop u8 brightness; //brightness level enum { A1x = 0, //A1340D, A1300F A2x, //A2500H A4G, //A4700G D1x, //D1 L2D, //L2000D L3C, //L3800C L3D, //L3400D L3H, //L3H, L2000E, L5D L4R, //L4500R L5x, //L5800C L8L, //L8400L M1A, //M1300A M2E, //M2400E, L4400L M6N, //M6800N, W3400N M6R, //M6700R, A3000G P30, //Samsung P30 S1x, //S1300A, but also L1400B and M2400A (L84F) S2x, //S200 (J1 reported), Victor MP-XP7210 W1N, //W1000N W5A, //W5A W3V, //W3030V xxN, //M2400N, M3700N, M5200N, M6800N, S1300N, S5200N A4S, //Z81sp //(Centrino) END_MODEL } model; //Models currently supported u16 event_count[128]; //count for each event TODO make this better }; /* Here we go */ #define A1x_PREFIX "\\_SB.PCI0.ISA.EC0." #define L3C_PREFIX "\\_SB.PCI0.PX40.ECD0." #define M1A_PREFIX "\\_SB.PCI0.PX40.EC0." #define P30_PREFIX "\\_SB.PCI0.LPCB.EC0." #define S1x_PREFIX "\\_SB.PCI0.PX40." #define S2x_PREFIX A1x_PREFIX #define xxN_PREFIX "\\_SB.PCI0.SBRG.EC0." static struct model_data model_conf[END_MODEL] = { /* * TODO I have seen a SWBX and AIBX method on some models, like L1400B, * it seems to be a kind of switch, but what for ? */ { .name = "A1x", .mt_mled = "MLED", .mled_status = "\\MAIL", .mt_lcd_switch = A1x_PREFIX "_Q10", .lcd_status = "\\BKLI", .brightness_up = A1x_PREFIX "_Q0E", .brightness_down = A1x_PREFIX "_Q0F"}, { .name = "A2x", .mt_mled = "MLED", .mt_wled = "WLED", .wled_status = "\\SG66", .mt_lcd_switch = "\\Q10", .lcd_status = "\\BAOF", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\INFB"}, { .name = "A4G", .mt_mled = "MLED", /* WLED present, but not controlled by ACPI */ .mt_lcd_switch = xxN_PREFIX "_Q10", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\ADVG"}, { .name = "D1x", .mt_mled = "MLED", .mt_lcd_switch = "\\Q0D", .lcd_status = "\\GP11", .brightness_up = "\\Q0C", .brightness_down = "\\Q0B", .brightness_status = "\\BLVL", .display_set = "SDSP", .display_get = "\\INFB"}, { .name = "L2D", .mt_mled = "MLED", .mled_status = "\\SGP6", .mt_wled = "WLED", .wled_status = "\\RCP3", .mt_lcd_switch = "\\Q10", .lcd_status = "\\SGP0", .brightness_up = "\\Q0E", .brightness_down = "\\Q0F", .display_set = "SDSP", .display_get = "\\INFB"}, { .name = "L3C", .mt_mled = "MLED", .mt_wled = "WLED", .mt_lcd_switch = L3C_PREFIX "_Q10", .lcd_status = "\\GL32", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\_SB.PCI0.PCI1.VGAC.NMAP"}, { .name = "L3D", .mt_mled = "MLED", .mled_status = "\\MALD", .mt_wled = "WLED", .mt_lcd_switch = "\\Q10", .lcd_status = "\\BKLG", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\INFB"}, { .name = "L3H", .mt_mled = "MLED", .mt_wled = "WLED", .mt_lcd_switch = "EHK", .lcd_status = "\\_SB.PCI0.PM.PBC", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\INFB"}, { .name = "L4R", .mt_mled = "MLED", .mt_wled = "WLED", .wled_status = "\\_SB.PCI0.SBRG.SG13", .mt_lcd_switch = xxN_PREFIX "_Q10", .lcd_status = "\\_SB.PCI0.SBSM.SEO4", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"}, { .name = "L5x", .mt_mled = "MLED", /* WLED present, but not controlled by ACPI */ .mt_tled = "TLED", .mt_lcd_switch = "\\Q0D", .lcd_status = "\\BAOF", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\INFB"}, { .name = "L8L" /* No features, but at least support the hotkeys */ }, { .name = "M1A", .mt_mled = "MLED", .mt_lcd_switch = M1A_PREFIX "Q10", .lcd_status = "\\PNOF", .brightness_up = M1A_PREFIX "Q0E", .brightness_down = M1A_PREFIX "Q0F", .brightness_status = "\\BRIT", .display_set = "SDSP", .display_get = "\\INFB"}, { .name = "M2E", .mt_mled = "MLED", .mt_wled = "WLED", .mt_lcd_switch = "\\Q10", .lcd_status = "\\GP06", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\INFB"}, { .name = "M6N", .mt_mled = "MLED", .mt_wled = "WLED", .wled_status = "\\_SB.PCI0.SBRG.SG13", .mt_lcd_switch = xxN_PREFIX "_Q10", .lcd_status = "\\_SB.BKLT", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\SSTE"}, { .name = "M6R", .mt_mled = "MLED", .mt_wled = "WLED", .mt_lcd_switch = xxN_PREFIX "_Q10", .lcd_status = "\\_SB.PCI0.SBSM.SEO4", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"}, { .name = "P30", .mt_wled = "WLED", .mt_lcd_switch = P30_PREFIX "_Q0E", .lcd_status = "\\BKLT", .brightness_up = P30_PREFIX "_Q68", .brightness_down = P30_PREFIX "_Q69", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\DNXT"}, { .name = "S1x", .mt_mled = "MLED", .mled_status = "\\EMLE", .mt_wled = "WLED", .mt_lcd_switch = S1x_PREFIX "Q10", .lcd_status = "\\PNOF", .brightness_set = "SPLV", .brightness_get = "GPLV"}, { .name = "S2x", .mt_mled = "MLED", .mled_status = "\\MAIL", .mt_lcd_switch = S2x_PREFIX "_Q10", .lcd_status = "\\BKLI", .brightness_up = S2x_PREFIX "_Q0B", .brightness_down = S2x_PREFIX "_Q0A"}, { .name = "W1N", .mt_mled = "MLED", .mt_wled = "WLED", .mt_ledd = "SLCM", .mt_lcd_switch = xxN_PREFIX "_Q10", .lcd_status = "\\BKLT", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\ADVG"}, { .name = "W5A", .mt_bt_switch = "BLED", .mt_wled = "WLED", .mt_lcd_switch = xxN_PREFIX "_Q10", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\ADVG"}, { .name = "W3V", .mt_mled = "MLED", .mt_wled = "WLED", .mt_lcd_switch = xxN_PREFIX "_Q10", .lcd_status = "\\BKLT", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\INFB"}, { .name = "xxN", .mt_mled = "MLED", /* WLED present, but not controlled by ACPI */ .mt_lcd_switch = xxN_PREFIX "_Q10", .lcd_status = "\\BKLT", .brightness_set = "SPLV", .brightness_get = "GPLV", .display_set = "SDSP", .display_get = "\\ADVG"}, { .name = "A4S", .brightness_set = "SPLV", .brightness_get = "GPLV", .mt_bt_switch = "BLED", .mt_wled = "WLED" } }; /* procdir we use */ static struct proc_dir_entry *asus_proc_dir; static struct backlight_device *asus_backlight_device; /* * This header is made available to allow proper configuration given model, * revision number , ... this info cannot go in struct asus_hotk because it is * available before the hotk */ static struct acpi_table_header *asus_info; /* The actual device the driver binds to */ static struct asus_hotk *hotk; /* * The hotkey driver declaration */ static int asus_hotk_add(struct acpi_device *device); static int asus_hotk_remove(struct acpi_device *device, int type); static struct acpi_driver asus_hotk_driver = { .name = "asus_acpi", .class = ACPI_HOTK_CLASS, .ids = ACPI_HOTK_HID, .ops = { .add = asus_hotk_add, .remove = asus_hotk_remove, }, }; /* * This function evaluates an ACPI method, given an int as parameter, the * method is searched within the scope of the handle, can be NULL. The output * of the method is written is output, which can also be NULL * * returns 1 if write is successful, 0 else. */ static int write_acpi_int(acpi_handle handle, const char *method, int val, struct acpi_buffer *output) { struct acpi_object_list params; //list of input parameters (an int here) union acpi_object in_obj; //the only param we use acpi_status status; params.count = 1; params.pointer = &in_obj; in_obj.type = ACPI_TYPE_INTEGER; in_obj.integer.value = val; status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); return (status == AE_OK); } static int read_acpi_int(acpi_handle handle, const char *method, int *val) { struct acpi_buffer output; union acpi_object out_obj; acpi_status status; output.length = sizeof(out_obj); output.pointer = &out_obj; status = acpi_evaluate_object(handle, (char *)method, NULL, &output); *val = out_obj.integer.value; return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); } /* * We write our info in page, we begin at offset off and cannot write more * than count bytes. We set eof to 1 if we handle those 2 values. We return the * number of bytes written in page */ static int proc_read_info(char *page, char **start, off_t off, int count, int *eof, void *data) { int len = 0; int temp; char buf[16]; //enough for all info /* * We use the easy way, we don't care of off and count, so we don't set eof * to 1 */ len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); len += sprintf(page + len, "Model reference : %s\n", hotk->methods->name); /* * The SFUN method probably allows the original driver to get the list * of features supported by a given model. For now, 0x0100 or 0x0800 * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. * The significance of others is yet to be found. */ if (read_acpi_int(hotk->handle, "SFUN", &temp)) len += sprintf(page + len, "SFUN value : 0x%04x\n", temp); /* * Another value for userspace: the ASYM method returns 0x02 for * battery low and 0x04 for battery critical, its readings tend to be * more accurate than those provided by _BST. * Note: since not all the laptops provide this method, errors are * silently ignored. */ if (read_acpi_int(hotk->handle, "ASYM", &temp)) len += sprintf(page + len, "ASYM value : 0x%04x\n", temp); if (asus_info) { snprintf(buf, 16, "%d", asus_info->length); len += sprintf(page + len, "DSDT length : %s\n", buf); snprintf(buf, 16, "%d", asus_info->checksum); len += sprintf(page + len, "DSDT checksum : %s\n", buf); snprintf(buf, 16, "%d", asus_info->revision); len += sprintf(page + len, "DSDT revision : %s\n", buf); snprintf(buf, 7, "%s", asus_info->oem_id); len += sprintf(page + len, "OEM id : %s\n", buf); snprintf(buf, 9, "%s", asus_info->oem_table_id); len += sprintf(page + len, "OEM table id : %s\n", buf); snprintf(buf, 16, "%x", asus_info->oem_revision); len += sprintf(page + len, "OEM revision : 0x%s\n", buf); snprintf(buf, 5, "%s", asus_info->asl_compiler_id); len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); snprintf(buf, 16, "%x", asus_info->asl_compiler_revision); len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); } return len; } /* * /proc handlers * We write our info in page, we begin at offset off and cannot write more * than count bytes. We set eof to 1 if we handle those 2 values. We return the * number of bytes written in page */ /* Generic LED functions */ static int read_led(const char *ledname, int ledmask) { if (ledname) { int led_status; if (read_acpi_int(NULL, ledname, &led_status)) return led_status; else printk(KERN_WARNING "Asus ACPI: Error reading LED " "status\n"); } return (hotk->status & ledmask) ? 1 : 0; } static int parse_arg(const char __user * buf, unsigned long count, int *val) { char s[32]; if (!count) return 0; if (count > 31) return -EINVAL; if (copy_from_user(s, buf, count)) return -EFAULT; s[count] = 0; if (sscanf(s, "%i", val) != 1) return -EINVAL; return count; } /* FIXME: kill extraneous args so it can be called independently */ static int write_led(const char __user * buffer, unsigned long count, char *ledname, int ledmask, int invert) { int rv, value; int led_out = 0; rv = parse_arg(buffer, count, &value); if (rv > 0) led_out = value ? 1 : 0; hotk->status = (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask); if (invert) /* invert target value */ led_out = !led_out & 0x1; if (!write_acpi_int(hotk->handle, ledname, led_out, NULL)) printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n", ledname); return rv; } /* * Proc handlers for MLED */ static int proc_read_mled(char *page, char **start, off_t off, int count, int *eof, void *data) { return sprintf(page, "%d\n", read_led(hotk->methods->mled_status, MLED_ON)); } static int proc_write_mled(struct file *file, const char __user * buffer, unsigned long count, void *data) { return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1); } /* * Proc handlers for LED display */ static int proc_read_ledd(char *page, char **start, off_t off, int count, int *eof, void *data) { return sprintf(page, "0x%08x\n", hotk->ledd_status); } static int proc_write_ledd(struct file *file, const char __user * buffer, unsigned long count, void *data) { int rv, value; rv = parse_arg(buffer, count, &value); if (rv > 0) { if (!write_acpi_int (hotk->handle, hotk->methods->mt_ledd, value, NULL)) printk(KERN_WARNING "Asus ACPI: LED display write failed\n"); else hotk->ledd_status = (u32) value; } return rv; } /* * Proc handlers for WLED */ static int proc_read_wled(char *page, char **start, off_t off, int count, int *eof, void *data) { return sprintf(page, "%d\n", read_led(hotk->methods->wled_status, WLED_ON)); } static int proc_write_wled(struct file *file, const char __user * buffer, unsigned long count, void *data) { return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0); } /* * Proc handlers for Bluetooth */ static int proc_read_bluetooth(char *page, char **start, off_t off, int count, int *eof, void *data) { return sprintf(page, "%d\n", read_led(hotk->methods->bt_status, BT_ON)); } static int proc_write_bluetooth(struct file *file, const char __user * buffer, unsigned long count, void *data) { /* Note: mt_bt_switch controls both internal Bluetooth adapter's presence and its LED */ return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0); } /* * Proc handlers for TLED */ static int proc_read_tled(char *page, char **start, off_t off, int count, int *eof, void *data) { return sprintf(page, "%d\n", read_led(hotk->methods->tled_status, TLED_ON)); } static int proc_write_tled(struct file *file, const char __user * buffer, unsigned long count, void *data) { return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0); } static int get_lcd_state(void) { int lcd = 0; if (hotk->model != L3H) { /* We don't have to check anything if we are here */ if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd)) printk(KERN_WARNING "Asus ACPI: Error reading LCD status\n"); if (hotk->model == L2D) lcd = ~lcd; } else { /* L3H and the like have to be handled differently */ acpi_status status = 0; struct acpi_object_list input; union acpi_object mt_params[2]; struct acpi_buffer output; union acpi_object out_obj; input.count = 2; input.pointer = mt_params; /* Note: the following values are partly guessed up, but otherwise they seem to work */ mt_params[0].type = ACPI_TYPE_INTEGER; mt_params[0].integer.value = 0x02; mt_params[1].type = ACPI_TYPE_INTEGER; mt_params[1].integer.value = 0x02; output.length = sizeof(out_obj); output.pointer = &out_obj; status = acpi_evaluate_object(NULL, hotk->methods->lcd_status, &input, &output); if (status != AE_OK) return -1; if (out_obj.type == ACPI_TYPE_INTEGER) /* That's what the AML code does */ lcd = out_obj.integer.value >> 8; } return (lcd & 1); } static int set_lcd_state(int value) { int lcd = 0; acpi_status status = 0; lcd = value ? 1 : 0; if (lcd != get_lcd_state()) { /* switch */ if (hotk->model != L3H) { status = acpi_evaluate_object(NULL, hotk->methods->mt_lcd_switch, NULL, NULL); } else { /* L3H and the like have to be handled differently */ if (!write_acpi_int (hotk->handle, hotk->methods->mt_lcd_switch, 0x07, NULL)) status = AE_ERROR; /* L3H's AML executes EHK (0x07) upon Fn+F7 keypress, the exact behaviour is simulated here */ } if (ACPI_FAILURE(status)) printk(KERN_WARNING "Asus ACPI: Error switching LCD\n"); } return 0; } static int proc_read_lcd(char *page, char **start, off_t off, int count, int *eof, void *data) { return sprintf(page, "%d\n", get_lcd_state()); } static int proc_write_lcd(struct file *file, const char __user * buffer, unsigned long count, void *data) { int rv, value; rv = parse_arg(buffer, count, &value); if (rv > 0) set_lcd_state(value); return rv; } static int read_brightness(struct backlight_device *bd) { int value; if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */ if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get, &value)) printk(KERN_WARNING "Asus ACPI: Error reading brightness\n"); } else if (hotk->methods->brightness_status) { /* For D1 for example */ if (!read_acpi_int(NULL, hotk->methods->brightness_status, &value)) printk(KERN_WARNING "Asus ACPI: Error reading brightness\n"); } else /* No GPLV method */ value = hotk->brightness; return value; } /* * Change the brightness level */ static int set_brightness(int value) { acpi_status status = 0; int ret = 0; /* SPLV laptop */ if (hotk->methods->brightness_set) { if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set, value, NULL)) printk(KERN_WARNING "Asus ACPI: Error changing brightness\n"); ret = -EIO; goto out; } /* No SPLV method if we are here, act as appropriate */ value -= read_brightness(NULL); while (value != 0) { status = acpi_evaluate_object(NULL, (value > 0) ? hotk->methods->brightness_up : hotk->methods->brightness_down, NULL, NULL); (value > 0) ? value-- : value++; if (ACPI_FAILURE(status)) printk(KERN_WARNING "Asus ACPI: Error changing brightness\n"); ret = -EIO; } out: return ret; } static int set_brightness_status(struct backlight_device *bd) { return set_brightness(bd->props.brightness); } static int proc_read_brn(char *page, char **start, off_t off, int count, int *eof, void *data) { return sprintf(page, "%d\n", read_brightness(NULL)); } static int proc_write_brn(struct file *file, const char __user * buffer, unsigned long count, void *data) { int rv, value; rv = parse_arg(buffer, count, &value); if (rv > 0) { value = (0 < value) ? ((15 < value) ? 15 : value) : 0; /* 0 <= value <= 15 */ set_brightness(value); } return rv; } static void set_display(int value) { /* no sanity check needed for now */ if (!write_acpi_int(hotk->handle, hotk->methods->display_set, value, NULL)) printk(KERN_WARNING "Asus ACPI: Error setting display\n"); return; } /* * Now, *this* one could be more user-friendly, but so far, no-one has * complained. The significance of bits is the same as in proc_write_disp() */ static int proc_read_disp(char *page, char **start, off_t off, int count, int *eof, void *data) { int value = 0; if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value)) printk(KERN_WARNING "Asus ACPI: Error reading display status\n"); value &= 0x07; /* needed for some models, shouldn't hurt others */ return sprintf(page, "%d\n", value); } /* * Experimental support for display switching. As of now: 1 should activate * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination * (bitwise) of these will suffice. I never actually tested 3 displays hooked up * simultaneously, so be warned. See the acpi4asus README for more info. */ static int proc_write_disp(struct file *file, const char __user * buffer, unsigned long count, void *data) { int rv, value; rv = parse_arg(buffer, count, &value); if (rv > 0) set_display(value); return rv; } typedef int (proc_readfunc) (char *page, char **start, off_t off, int count, int *eof, void *data); typedef int (proc_writefunc) (struct file * file, const char __user * buffer, unsigned long count, void *data); static int asus_proc_add(char *name, proc_writefunc * writefunc, proc_readfunc * readfunc, mode_t mode, struct acpi_device *device) { struct proc_dir_entry *proc = create_proc_entry(name, mode, acpi_device_dir(device)); if (!proc) { printk(KERN_WARNING " Unable to create %s fs entry\n", name); return -1; } proc->write_proc = writefunc; proc->read_proc = readfunc; proc->data = acpi_driver_data(device); proc->owner = THIS_MODULE; proc->uid = asus_uid; proc->gid = asus_gid; return 0; } static int asus_hotk_add_fs(struct acpi_device *device) { struct proc_dir_entry *proc; mode_t mode; /* * If parameter uid or gid is not changed, keep the default setting for * our proc entries (-rw-rw-rw-) else, it means we care about security, * and then set to -rw-rw---- */ if ((asus_uid == 0) && (asus_gid == 0)) { mode = S_IFREG | S_IRUGO | S_IWUGO; } else { mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP; printk(KERN_WARNING " asus_uid and asus_gid parameters are " "deprecated, use chown and chmod instead!\n"); } acpi_device_dir(device) = asus_proc_dir; if (!acpi_device_dir(device)) return -ENODEV; proc = create_proc_entry(PROC_INFO, mode, acpi_device_dir(device)); if (proc) { proc->read_proc = proc_read_info; proc->data = acpi_driver_data(device); proc->owner = THIS_MODULE; proc->uid = asus_uid; proc->gid = asus_gid; } else { printk(KERN_WARNING " Unable to create " PROC_INFO " fs entry\n"); } if (hotk->methods->mt_wled) { asus_proc_add(PROC_WLED, &proc_write_wled, &proc_read_wled, mode, device); } if (hotk->methods->mt_ledd) { asus_proc_add(PROC_LEDD, &proc_write_ledd, &proc_read_ledd, mode, device); } if (hotk->methods->mt_mled) { asus_proc_add(PROC_MLED, &proc_write_mled, &proc_read_mled, mode, device); } if (hotk->methods->mt_tled) { asus_proc_add(PROC_TLED, &proc_write_tled, &proc_read_tled, mode, device); } if (hotk->methods->mt_bt_switch) { asus_proc_add(PROC_BT, &proc_write_bluetooth, &proc_read_bluetooth, mode, device); } /* * We need both read node and write method as LCD switch is also accessible * from keyboard */ if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) { asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode, device); } if ((hotk->methods->brightness_up && hotk->methods->brightness_down) || (hotk->methods->brightness_get && hotk->methods->brightness_set)) { asus_proc_add(PROC_BRN, &proc_write_brn, &proc_read_brn, mode, device); } if (hotk->methods->display_set) { asus_proc_add(PROC_DISP, &proc_write_disp, &proc_read_disp, mode, device); } return 0; } static int asus_hotk_remove_fs(struct acpi_device *device) { if (acpi_device_dir(device)) { remove_proc_entry(PROC_INFO, acpi_device_dir(device)); if (hotk->methods->mt_wled) remove_proc_entry(PROC_WLED, acpi_device_dir(device)); if (hotk->methods->mt_mled) remove_proc_entry(PROC_MLED, acpi_device_dir(device)); if (hotk->methods->mt_tled) remove_proc_entry(PROC_TLED, acpi_device_dir(device)); if (hotk->methods->mt_ledd) remove_proc_entry(PROC_LEDD, acpi_device_dir(device)); if (hotk->methods->mt_bt_switch) remove_proc_entry(PROC_BT, acpi_device_dir(device)); if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) remove_proc_entry(PROC_LCD, acpi_device_dir(device)); if ((hotk->methods->brightness_up && hotk->methods->brightness_down) || (hotk->methods->brightness_get && hotk->methods->brightness_set)) remove_proc_entry(PROC_BRN, acpi_device_dir(device)); if (hotk->methods->display_set) remove_proc_entry(PROC_DISP, acpi_device_dir(device)); } return 0; } static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) { /* TODO Find a better way to handle events count. */ if (!hotk) return; if ((event & ~((u32) BR_UP)) < 16) { hotk->brightness = (event & ~((u32) BR_UP)); } else if ((event & ~((u32) BR_DOWN)) < 16) { hotk->brightness = (event & ~((u32) BR_DOWN)); } acpi_bus_generate_event(hotk->device, event, hotk->event_count[event % 128]++); return; } /* * Match the model string to the list of supported models. Return END_MODEL if * no match or model is NULL. */ static int asus_model_match(char *model) { if (model == NULL) return END_MODEL; if (strncmp(model, "L3D", 3) == 0) return L3D; else if (strncmp(model, "L2E", 3) == 0 || strncmp(model, "L3H", 3) == 0 || strncmp(model, "L5D", 3) == 0) return L3H; else if (strncmp(model, "L3", 2) == 0 || strncmp(model, "L2B", 3) == 0) return L3C; else if (strncmp(model, "L8L", 3) == 0) return L8L; else if (strncmp(model, "L4R", 3) == 0) return L4R; else if (strncmp(model, "M6N", 3) == 0 || strncmp(model, "W3N", 3) == 0) return M6N; else if (strncmp(model, "M6R", 3) == 0 || strncmp(model, "A3G", 3) == 0) return M6R; else if (strncmp(model, "M2N", 3) == 0 || strncmp(model, "M3N", 3) == 0 || strncmp(model, "M5N", 3) == 0 || strncmp(model, "M6N", 3) == 0 || strncmp(model, "S1N", 3) == 0 || strncmp(model, "S5N", 3) == 0 || strncmp(model, "W1N", 3) == 0) return xxN; else if (strncmp(model, "M1", 2) == 0) return M1A; else if (strncmp(model, "M2", 2) == 0 || strncmp(model, "L4E", 3) == 0) return M2E; else if (strncmp(model, "L2", 2) == 0) return L2D; else if (strncmp(model, "L8", 2) == 0) return S1x; else if (strncmp(model, "D1", 2) == 0) return D1x; else if (strncmp(model, "A1", 2) == 0) return A1x; else if (strncmp(model, "A2", 2) == 0) return A2x; else if (strncmp(model, "J1", 2) == 0) return S2x; else if (strncmp(model, "L5", 2) == 0) return L5x; else if (strncmp(model, "A4G", 3) == 0) return A4G; else if (strncmp(model, "W1N", 3) == 0) return W1N; else if (strncmp(model, "W3V", 3) == 0) return W3V; else if (strncmp(model, "W5A", 3) == 0) return W5A; else if (strncmp(model, "A4S", 3) == 0) return A4S; else return END_MODEL; } /* * This function is used to initialize the hotk with right values. In this * method, we can make all the detection we want, and modify the hotk struct */ static int asus_hotk_get_info(void) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *model = NULL; int bsts_result; char *string = NULL; acpi_status status; /* * Get DSDT headers early enough to allow for differentiating between * models, but late enough to allow acpi_bus_register_driver() to fail * before doing anything ACPI-specific. Should we encounter a machine, * which needs special handling (i.e. its hotkey device has a different * HID), this bit will be moved. A global variable asus_info contains * the DSDT header. */ status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info); if (ACPI_FAILURE(status)) printk(KERN_WARNING " Couldn't get the DSDT table header\n"); /* We have to write 0 on init this far for all ASUS models */ if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { printk(KERN_ERR " Hotkey initialization failed\n"); return -ENODEV; } /* This needs to be called for some laptops to init properly */ if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result)) printk(KERN_WARNING " Error calling BSTS\n"); else if (bsts_result) printk(KERN_NOTICE " BSTS called, 0x%02x returned\n", bsts_result); /* * Try to match the object returned by INIT to the specific model. * Handle every possible object (or the lack of thereof) the DSDT * writers might throw at us. When in trouble, we pass NULL to * asus_model_match() and try something completely different. */ if (buffer.pointer) { model = buffer.pointer; switch (model->type) { case ACPI_TYPE_STRING: string = model->string.pointer; break; case ACPI_TYPE_BUFFER: string = model->buffer.pointer; break; default: kfree(model); break; } } hotk->model = asus_model_match(string); if (hotk->model == END_MODEL) { /* match failed */ if (asus_info && strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) { hotk->model = P30; printk(KERN_NOTICE " Samsung P30 detected, supported\n"); } else { hotk->model = M2E; printk(KERN_NOTICE " unsupported model %s, trying " "default values\n", string); printk(KERN_NOTICE " send /proc/acpi/dsdt to the developers\n"); } hotk->methods = &model_conf[hotk->model]; return AE_OK; } hotk->methods = &model_conf[hotk->model]; printk(KERN_NOTICE " %s model detected, supported\n", string); /* Sort of per-model blacklist */ if (strncmp(string, "L2B", 3) == 0) hotk->methods->lcd_status = NULL; /* L2B is similar enough to L3C to use its settings, with this only exception */ else if (strncmp(string, "A3G", 3) == 0) hotk->methods->lcd_status = "\\BLFG"; /* A3G is like M6R */ else if (strncmp(string, "S5N", 3) == 0 || strncmp(string, "M5N", 3) == 0 || strncmp(string, "W3N", 3) == 0) hotk->methods->mt_mled = NULL; /* S5N, M5N and W3N have no MLED */ else if (strncmp(string, "L5D", 3) == 0) hotk->methods->mt_wled = NULL; /* L5D's WLED is not controlled by ACPI */ else if (strncmp(string, "M2N", 3) == 0 || strncmp(string, "W3V", 3) == 0 || strncmp(string, "S1N", 3) == 0) hotk->methods->mt_wled = "WLED"; /* M2N, S1N and W3V have a usable WLED */ else if (asus_info) { if (strncmp(asus_info->oem_table_id, "L1", 2) == 0) hotk->methods->mled_status = NULL; /* S1300A reports L84F, but L1400B too, account for that */ } kfree(model); return AE_OK; } static int asus_hotk_check(void) { int result = 0; result = acpi_bus_get_status(hotk->device); if (result) return result; if (hotk->device->status.present) { result = asus_hotk_get_info(); } else { printk(KERN_ERR " Hotkey device not present, aborting\n"); return -EINVAL; } return result; } static int asus_hotk_found; static int asus_hotk_add(struct acpi_device *device) { acpi_status status = AE_OK; int result; if (!device) return -EINVAL; printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n", ASUS_ACPI_VERSION); hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL); if (!hotk) return -ENOMEM; hotk->handle = device->handle; strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_HOTK_CLASS); acpi_driver_data(device) = hotk; hotk->device = device; result = asus_hotk_check(); if (result) goto end; result = asus_hotk_add_fs(device); if (result) goto end; /* * We install the handler, it will receive the hotk in parameter, so, we * could add other data to the hotk struct */ status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY, asus_hotk_notify, hotk); if (ACPI_FAILURE(status)) printk(KERN_ERR " Error installing notify handler\n"); /* For laptops without GPLV: init the hotk->brightness value */ if ((!hotk->methods->brightness_get) && (!hotk->methods->brightness_status) && (hotk->methods->brightness_up && hotk->methods->brightness_down)) { status = acpi_evaluate_object(NULL, hotk->methods->brightness_down, NULL, NULL); if (ACPI_FAILURE(status)) printk(KERN_WARNING " Error changing brightness\n"); else { status = acpi_evaluate_object(NULL, hotk->methods->brightness_up, NULL, NULL); if (ACPI_FAILURE(status)) printk(KERN_WARNING " Strange, error changing" " brightness\n"); } } asus_hotk_found = 1; /* LED display is off by default */ hotk->ledd_status = 0xFFF; end: if (result) { kfree(hotk); } return result; } static int asus_hotk_remove(struct acpi_device *device, int type) { acpi_status status = 0; if (!device || !acpi_driver_data(device)) return -EINVAL; status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY, asus_hotk_notify); if (ACPI_FAILURE(status)) printk(KERN_ERR "Asus ACPI: Error removing notify handler\n"); asus_hotk_remove_fs(device); kfree(hotk); return 0; } static struct backlight_ops asus_backlight_data = { .get_brightness = read_brightness, .update_status = set_brightness_status, }; static void __exit asus_acpi_exit(void) { if (asus_backlight_device) backlight_device_unregister(asus_backlight_device); acpi_bus_unregister_driver(&asus_hotk_driver); remove_proc_entry(PROC_ASUS, acpi_root_dir); return; } static int __init asus_acpi_init(void) { int result; if (acpi_disabled) return -ENODEV; asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir); if (!asus_proc_dir) { printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n"); return -ENODEV; } asus_proc_dir->owner = THIS_MODULE; result = acpi_bus_register_driver(&asus_hotk_driver); if (result < 0) { remove_proc_entry(PROC_ASUS, acpi_root_dir); return result; } /* * This is a bit of a kludge. We only want this module loaded * for ASUS systems, but there's currently no way to probe the * ACPI namespace for ASUS HIDs. So we just return failure if * we didn't find one, which will cause the module to be * unloaded. */ if (!asus_hotk_found) { acpi_bus_unregister_driver(&asus_hotk_driver); remove_proc_entry(PROC_ASUS, acpi_root_dir); return result; } asus_backlight_device = backlight_device_register("asus",NULL,NULL, &asus_backlight_data); if (IS_ERR(asus_backlight_device)) { printk(KERN_ERR "Could not register asus backlight device\n"); asus_backlight_device = NULL; asus_acpi_exit(); } asus_backlight_device->props.max_brightness = 15; return 0; } /* * Replaced with eeepc_hotk_init */ //module_init(asus_acpi_init); /* * Replaced with eeepc_hotk_exit */ //module_exit(asus_acpi_exit); /* * returns 1 if write is successful, 0 else. */ static int write_eeepc_acpi_int(acpi_handle handle, const char *method, int val, struct acpi_buffer *output) { struct acpi_object_list params; union acpi_object in_obj; acpi_status status; params.count = 1; params.pointer = &in_obj; in_obj.type = ACPI_TYPE_INTEGER; in_obj.integer.value = val; status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); return (status == AE_OK); } static int read_eeepc_acpi_int(acpi_handle handle, const char *method, int *val) { struct acpi_buffer output; union acpi_object out_obj; acpi_status status; output.length = sizeof(out_obj); output.pointer = &out_obj; status = acpi_evaluate_object(handle, (char *)method, NULL, &output); *val = out_obj.integer.value; return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); } static int eeepc_hotk_write_proc(struct file *file, const char __user * buffer, unsigned long count, void *data) { int value, rv; cm_asl_t cm; rv = parse_arg(buffer, count, &value); cm = (unsigned int)data; if((ehotk->cm_supported & (0x1<handle, cm_setv[cm], value, NULL)) printk(KERN_WARNING "[eeepc hotk] Error writing %s.\n", cm_setv[cm]); } return rv; } static int eeepc_hotk_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data) { int value; cm_asl_t cm; cm = (unsigned int)data; if((ehotk->cm_supported & (0x1<handle, cm_getv[cm], &value)) printk(KERN_WARNING "[eeepc hotk] Error reading %s.\n", cm_getv[cm]); } else value = -1; return sprintf(page, "%d\n", value); } static int eeepc_hotk_reset_init(struct file *file, const char __user * buffer, unsigned long count, void *data) { int value, rv; rv = parse_arg(buffer, count, &value); if (!write_eeepc_acpi_int(ehotk->handle, "INIT", value, NULL)) printk(KERN_ERR "[eeepc hotk] Hotkey initialization failed\n"); else printk(KERN_INFO "[eeepc hotk] reset init flag 0x%x\n", value); return rv; } static int eeepc_hotk_init_proc(char* name, mode_t mode, struct acpi_device *device) { struct proc_dir_entry *proc = create_proc_entry(name, mode, acpi_device_dir(device)); if (!proc) { printk(KERN_WARNING "[eeepc hotk] Unable to create init fs entry\n"); return -1; } proc->write_proc = eeepc_hotk_reset_init; proc->read_proc = NULL; proc->data = NULL; proc->owner = THIS_MODULE; proc->uid = eeepc_uid; proc->gid = eeepc_gid; return 0; } static int eeepc_hotk_new_proc(char *name, cm_asl_t cm , mode_t mode, struct acpi_device *device) { struct proc_dir_entry *proc = create_proc_entry(name, mode, acpi_device_dir(device)); if (!proc) { printk(KERN_WARNING "[eeepc hotk] Unable to create %s fs entry\n", name); return -1; } proc->write_proc = eeepc_hotk_write_proc; proc->read_proc = eeepc_hotk_read_proc; proc->data = (void*)cm; proc->owner = THIS_MODULE; proc->uid = eeepc_uid; proc->gid = eeepc_gid; return 0; } static int eeepc_hotk_add_fs(struct acpi_device *device) { mode_t mode; if ((eeepc_uid == 0) && (eeepc_gid == 0)) mode = S_IFREG | S_IRUGO | S_IWUGO; else { mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP; printk(KERN_WARNING " eeepc_uid and eeepc_gid parameters are " "deprecated, use chown and chmod instead!\n"); } acpi_device_dir(device) = eeepc_proc_dir; if (!acpi_device_dir(device)) return -ENODEV; if(ehotk->cm_supported & (0x1 << CM_ASL_WLAN)) eeepc_hotk_new_proc(PROC_WLAN, CM_ASL_WLAN , mode, device); if(ehotk->cm_supported & (0x1 << CM_ASL_CAMERA)) eeepc_hotk_new_proc(PROC_CAMERA, CM_ASL_CAMERA , mode, device); if(ehotk->cm_supported & (0x1 << CM_ASL_DISPLAYSWITCH)) eeepc_hotk_new_proc(PROC_DISP, CM_ASL_DISPLAYSWITCH , mode, device); if(ehotk->cm_supported & (0x1 << CM_ASL_PANELBRIGHT)) eeepc_hotk_new_proc(PROC_BRN, CM_ASL_PANELBRIGHT , mode, device); if(ehotk->cm_supported & (0x1 << CM_ASL_BIOSFLASH)) eeepc_hotk_new_proc(PROC_HDPS, CM_ASL_BIOSFLASH , mode, device); if(ehotk->cm_supported & (0x1 << CM_ASL_CPUFV)) eeepc_hotk_new_proc(PROC_CPUFV, CM_ASL_CPUFV , mode, device); if(ehotk->cm_supported & (0x1 << CM_ASL_MODEM)) eeepc_hotk_new_proc(PROC_MODEM, CM_ASL_MODEM , mode, device); if(ehotk->cm_supported & (0x1 << CM_ASL_CARDREADER)) eeepc_hotk_new_proc(PROC_CARDR, CM_ASL_CARDREADER , mode, device); eeepc_hotk_init_proc(PROC_INIT, mode, device); return 0; } static int eeepc_hotk_remove_fs(struct acpi_device *device) { if (acpi_device_dir(device)) { if(ehotk->cm_supported & (0x1 << CM_ASL_WLAN)) remove_proc_entry(PROC_WLAN, acpi_device_dir(device)); if(ehotk->cm_supported & (0x1 << CM_ASL_CAMERA)) remove_proc_entry(PROC_CAMERA, acpi_device_dir(device)); if(ehotk->cm_supported & (0x1 << CM_ASL_DISPLAYSWITCH)) remove_proc_entry(PROC_DISP, acpi_device_dir(device)); if(ehotk->cm_supported & (0x1 << CM_ASL_PANELBRIGHT)) remove_proc_entry(PROC_BRN, acpi_device_dir(device)); if(ehotk->cm_supported & (0x1 << CM_ASL_BIOSFLASH)) remove_proc_entry(PROC_HDPS, acpi_device_dir(device)); if(ehotk->cm_supported & (0x1 << CM_ASL_CPUFV)) remove_proc_entry(PROC_CPUFV, acpi_device_dir(device)); if(ehotk->cm_supported & (0x1 << CM_ASL_MODEM)) remove_proc_entry(PROC_MODEM, acpi_device_dir(device)); if(ehotk->cm_supported & (0x1 << CM_ASL_CARDREADER)) remove_proc_entry(PROC_CARDR, acpi_device_dir(device)); remove_proc_entry(PROC_INIT, acpi_device_dir(device)); } return 0; } static int eeepc_hotk_check(void) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; int result = AE_OK; result = acpi_bus_get_status(ehotk->device); if(result) return result; if(ehotk->device->status.present) { if (!write_eeepc_acpi_int(ehotk->handle, "INIT", init_flag, &buffer)) { printk(KERN_ERR "[eeepc hotk] Hotkey initialization failed\n"); return -ENODEV; } else printk(KERN_NOTICE "[eeepc hotk] Hotkey init flags 0x%x.\n", init_flag); // get control methods supported. if(!read_eeepc_acpi_int(ehotk->handle, "CMSG", &ehotk->cm_supported)) { printk(KERN_ERR "[eeepc hotk] Get control methods supported failed\n"); return -ENODEV; } else printk(KERN_INFO "[eeepc hotk] Get control methods supported : 0x%x\n", ehotk->cm_supported); ehotk->cm_supported = ehotk->cm_supported | (0x01 << CM_ASL_LID); } else { printk(KERN_ERR "[eeepc hotk] Hotkey device not present, aborting\n"); return -EINVAL; } return result; } static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) { int value; if (!ehotk) return; // if DISABLE_ASL_WLAN is set, the notify code for fn+f2 will always be 0x10 if((DISABLE_ASL_WLAN&init_flag) && (event==NOTIFY_WLAN_ON)) { if(ehotk->cm_supported & (0x1 << CM_ASL_WLAN)) { if(!(read_eeepc_acpi_int(ehotk->handle, cm_getv[CM_ASL_WLAN], &value))) printk(KERN_WARNING "[eeepc hotk] Error reading %s\n", cm_getv[CM_ASL_WLAN]); else if(value == 1) event = 0x11; } } acpi_bus_generate_event(ehotk->device, event, ehotk->event_count[event % 128]++); return; } static int ehotk_found; static int eeepc_hotk_add(struct acpi_device *device) { acpi_status status = AE_OK; int result; if(!device) return -EINVAL; printk(KERN_NOTICE "Asus EEEPC HOTKEY\n"); ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL); if(!ehotk) return -ENOMEM; ehotk->handle = device->handle; strcpy(acpi_device_name(device), EEEPC_HOTK_DEVICE_NAME); strcpy(acpi_device_class(device), EEEPC_HOTK_CLASS); acpi_driver_data(device) = ehotk; ehotk->device = device; result = eeepc_hotk_check(); if (result) goto end; result = eeepc_hotk_add_fs(device); if (result) goto end; status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY, eeepc_hotk_notify, ehotk); if (ACPI_FAILURE(status)) printk(KERN_ERR " Error installing notify handler\n"); ehotk_found = 1; end: if (result) { kfree(ehotk); } return result; } static int eeepc_hotk_remove(struct acpi_device *device, int type) { acpi_status status = 0; if (!device || !acpi_driver_data(device)) return -EINVAL; status = acpi_remove_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY, eeepc_hotk_notify); if (ACPI_FAILURE(status)) printk(KERN_ERR "[eeepc hotk] Error removing notify handler\n"); eeepc_hotk_remove_fs(device); kfree(ehotk); return 0; } static void __exit eeepc_hotk_exit(void) { acpi_bus_unregister_driver(&eeepc_hotk_driver); remove_proc_entry(PROC_ASUS, acpi_root_dir); return; } static int __init eeepc_hotk_init(void) { int result; if (acpi_disabled) return -ENODEV; eeepc_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir); if (!eeepc_proc_dir) { printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n"); return -ENODEV; } eeepc_proc_dir->owner = THIS_MODULE; init_flag = DISABLE_ASL_WLAN|DISABLE_ASL_DISPLAYSWITCH; result = acpi_bus_register_driver(&eeepc_hotk_driver); if (result < 0) { remove_proc_entry(PROC_ASUS, acpi_root_dir); return result; } if (!ehotk_found) { acpi_bus_unregister_driver(&eeepc_hotk_driver); remove_proc_entry(PROC_ASUS, acpi_root_dir); return result; } return 0; } module_init(eeepc_hotk_init); module_exit(eeepc_hotk_exit);