/* $NetBSD: beagle_machdep.c,v 1.68 2016/10/20 09:53:08 skrll Exp $ */ /* * Machine dependent functions for kernel setup for TI OSK5912 board. * Based on lubbock_machdep.c which in turn was based on iq80310_machhdep.c * * Copyright (c) 2002, 2003, 2005 Genetec Corporation. All rights reserved. * Written by Hiroyuki Bessho for Genetec Corporation. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of Genetec Corporation may not be used to endorse or * promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORPORATION * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * Copyright (c) 2001 Wasabi Systems, Inc. * All rights reserved. * * Written by Jason R. Thorpe for Wasabi Systems, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Wasabi Systems, Inc. * 4. The name of Wasabi Systems, Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * Copyright (c) 1997,1998 Mark Brinicombe. * Copyright (c) 1997,1998 Causality Limited. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Mark Brinicombe * for the NetBSD Project. * 4. The name of the company nor the name of the author may be used to * endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Copyright (c) 2007 Microsoft * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Microsoft * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTERS BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: beagle_machdep.c,v 1.68 2016/10/20 09:53:08 skrll Exp $"); #include "opt_machdep.h" #include "opt_ddb.h" #include "opt_kgdb.h" #include "opt_ipkdb.h" #include "opt_md.h" #include "opt_com.h" #include "opt_omap.h" #include "com.h" #include "omapwdt32k.h" #include "prcm.h" #include "sdhc.h" #include "ukbd.h" #include "arml2cc.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef KGDB #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #ifdef TI_AM335X # if NPRCM == 0 # error no prcm device configured. # endif # include # include # if NSDHC > 0 # include # include # endif #endif #ifdef CPU_CORTEXA9 #include #include #include #include #endif #if defined(CPU_CORTEXA7) || defined(CPU_CORTEXA15) #include #endif #include #include #include #include #include BootConfig bootconfig; /* Boot config storage */ static char bootargs[MAX_BOOT_STRING]; char *boot_args = NULL; char *boot_file = NULL; static uint8_t beagle_edid[128]; /* EDID storage */ u_int uboot_args[4] = { 0 }; /* filled in by beagle_start.S (not in bss) */ /* Same things, but for the free (unused by the kernel) memory. */ extern char KERNEL_BASE_phys[]; extern char _end[]; #if NCOM > 0 int use_fb_console = false; #else int use_fb_console = true; #endif #ifdef CPU_CORTEXA15 uint32_t omap5_cnt_frq; #endif /* * Macros to translate between physical and virtual for a subset of the * kernel address space. *Not* for general use. */ #define KERNEL_BASE_PHYS ((paddr_t)KERNEL_BASE_phys) #define OMAP_L4_CORE_VOFFSET (OMAP_L4_CORE_VBASE - OMAP_L4_CORE_BASE) /* Prototypes */ void consinit(void); #ifdef KGDB static void kgdb_port_init(void); #endif static void init_clocks(void); static void beagle_device_register(device_t, void *); static void beagle_reset(void); #if defined(OMAP_3XXX) || defined(TI_DM37XX) static void omap3_cpu_clk(void); #endif #if defined(OMAP_4XXX) || defined(OMAP_5XXX) static void omap4_cpu_clk(void); #endif #if defined(OMAP_4XXX) || defined(OMAP_5XXX) || defined(TI_AM335X) static psize_t emif_memprobe(void); #endif #if defined(OMAP_3XXX) static psize_t omap3_memprobe(void); #endif bs_protos(bs_notimpl); #if NCOM > 0 #include #include #endif /* * Static device mappings. These peripheral registers are mapped at * fixed virtual addresses very early in initarm() so that we can use * them while booting the kernel, and stay at the same address * throughout whole kernel's life time. * * We use this table twice; once with bootstrap page table, and once * with kernel's page table which we build up in initarm(). * * Since we map these registers into the bootstrap page table using * pmap_devmap_bootstrap() which calls pmap_map_chunk(), we map * registers segment-aligned and segment-rounded in order to avoid * using the 2nd page tables. */ #define _A(a) ((a) & ~L1_S_OFFSET) #define _S(s) (((s) + L1_S_SIZE - 1) & ~(L1_S_SIZE-1)) static const struct pmap_devmap devmap[] = { { /* * Map the first 1MB of L4 Core area * this gets us the ICU, I2C, USB, GPT[10-11], MMC, McSPI * UART[12], clock manager, sDMA, ... */ .pd_va = _A(OMAP_L4_CORE_VBASE), .pd_pa = _A(OMAP_L4_CORE_BASE), .pd_size = _S(OMAP_L4_CORE_SIZE), .pd_prot = VM_PROT_READ|VM_PROT_WRITE, .pd_cache = PTE_NOCACHE }, { /* * Map the all 1MB of the L4 Core area * this gets us the console UART3, GPT[2-9], WDT1, * and GPIO[2-6]. */ .pd_va = _A(OMAP_L4_PERIPHERAL_VBASE), .pd_pa = _A(OMAP_L4_PERIPHERAL_BASE), .pd_size = _S(OMAP_L4_PERIPHERAL_SIZE), .pd_prot = VM_PROT_READ|VM_PROT_WRITE, .pd_cache = PTE_NOCACHE }, #if defined(OMAP_L4_WAKEUP_BASE) && defined(OMAP_L4_WAKEUP_VBASE) { /* * Map all 256KB of the L4 Wakeup area * this gets us GPIO1, WDT2, GPT1, 32K and power/reset regs */ .pd_va = _A(OMAP_L4_WAKEUP_VBASE), .pd_pa = _A(OMAP_L4_WAKEUP_BASE), .pd_size = _S(OMAP_L4_WAKEUP_SIZE), .pd_prot = VM_PROT_READ|VM_PROT_WRITE, .pd_cache = PTE_NOCACHE }, #endif #ifdef OMAP_L4_FAST_BASE { /* * Map all of the L4 Fast area * this gets us GPIO1, WDT2, GPT1, 32K and power/reset regs */ .pd_va = _A(OMAP_L4_FAST_VBASE), .pd_pa = _A(OMAP_L4_FAST_BASE), .pd_size = _S(OMAP_L4_FAST_SIZE), .pd_prot = VM_PROT_READ|VM_PROT_WRITE, .pd_cache = PTE_NOCACHE }, #endif #ifdef OMAP_EMIF1_BASE { /* * Map all of the L4 EMIF1 area */ .pd_va = _A(OMAP_EMIF1_VBASE), .pd_pa = _A(OMAP_EMIF1_BASE), .pd_size = _S(OMAP_EMIF1_SIZE), .pd_prot = VM_PROT_READ|VM_PROT_WRITE, .pd_cache = PTE_NOCACHE }, #endif #ifdef OMAP_EMIF2_BASE { /* * Map all of the L4 EMIF2 area */ .pd_va = _A(OMAP_EMIF2_VBASE), .pd_pa = _A(OMAP_EMIF2_BASE), .pd_size = _S(OMAP_EMIF2_SIZE), .pd_prot = VM_PROT_READ|VM_PROT_WRITE, .pd_cache = PTE_NOCACHE }, #endif #ifdef OMAP_L4_ABE_BASE { /* * Map all of the L4 Fast area * this gets us GPIO1, WDT2, GPT1, 32K and power/reset regs */ .pd_va = _A(OMAP_L4_ABE_VBASE), .pd_pa = _A(OMAP_L4_ABE_BASE), .pd_size = _S(OMAP_L4_ABE_SIZE), .pd_prot = VM_PROT_READ|VM_PROT_WRITE, .pd_cache = PTE_NOCACHE }, #endif #ifdef OMAP_SDRC_BASE { /* * Map SDRAM Controller (SDRC) registers */ .pd_va = _A(OMAP_SDRC_VBASE), .pd_pa = _A(OMAP_SDRC_BASE), .pd_size = _S(OMAP_SDRC_SIZE), .pd_prot = VM_PROT_READ|VM_PROT_WRITE, .pd_cache = PTE_NOCACHE, }, #endif {0} }; #undef _A #undef _S #ifdef DDB static void beagle_db_trap(int where) { #if NOMAPWDT32K > 0 static int oldwatchdogstate; if (where) { oldwatchdogstate = omapwdt32k_enable(0); } else { omapwdt32k_enable(oldwatchdogstate); } #endif } #endif #ifdef VERBOSE_INIT_ARM void beagle_putchar(char c); void beagle_putchar(char c) { #if NCOM > 0 volatile uint32_t *com0addr = (volatile uint32_t *)CONSADDR_VA; int timo = 150000; while ((com0addr[com_lsr] & LSR_TXRDY) == 0) { if (--timo == 0) break; } com0addr[com_data] = c; while ((com0addr[com_lsr] & LSR_TXRDY) == 0) { if (--timo == 0) break; } #endif } #else #define beagle_putchar(c) ((void)0) #endif /* * u_int initarm(...) * * Initial entry point on startup. This gets called before main() is * entered. * It should be responsible for setting up everything that must be * in place when main is called. * This includes * Taking a copy of the boot configuration structure. * Initialising the physical console so characters can be printed. * Setting up page tables for the kernel * Relocating the kernel to the bottom of physical memory */ u_int initarm(void *arg) { psize_t ram_size = 0; char *ptr; #if 1 beagle_putchar('d'); #endif /* * When we enter here, we are using a temporary first level * translation table with section entries in it to cover the OBIO * peripherals and SDRAM. The temporary first level translation table * is at the end of SDRAM. */ #if defined(OMAP_3XXX) || defined(TI_DM37XX) omap3_cpu_clk(); // find our CPU speed. #endif #if defined(OMAP_4XXX) || defined(OMAP_5XXX) omap4_cpu_clk(); // find our CPU speed. #endif #if defined(TI_AM335X) prcm_bootstrap(OMAP2_CM_BASE + OMAP_L4_CORE_VOFFSET); // find our reference clock. am335x_sys_clk(TI_AM335X_CTLMOD_BASE + OMAP_L4_CORE_VOFFSET); am335x_cpu_clk(); // find our CPU speed. #endif /* Heads up ... Setup the CPU / MMU / TLB functions. */ if (set_cpufuncs()) panic("cpu not recognized!"); init_clocks(); /* The console is going to try to map things. Give pmap a devmap. */ pmap_devmap_register(devmap); if (get_bootconf_option(bootargs, "console", BOOTOPT_TYPE_STRING, &ptr) && strncmp(ptr, "fb", 2) == 0) { use_fb_console = true; } consinit(); #ifdef CPU_CORTEXA15 #ifdef MULTIPROCESSOR arm_cpu_max = 1 + __SHIFTOUT(armreg_l2ctrl_read(), L2CTRL_NUMCPU); #endif #endif #if defined(OMAP_4XXX) #if NARML2CC > 0 /* * Probe the PL310 L2CC */ const bus_space_handle_t pl310_bh = OMAP4_L2CC_BASE + OMAP_L4_PERIPHERAL_VBASE - OMAP_L4_PERIPHERAL_BASE; arml2cc_init(&omap_bs_tag, pl310_bh, 0); beagle_putchar('l'); #endif #ifdef MULTIPROCESSOR const bus_space_handle_t scu_bh = OMAP4_SCU_BASE + OMAP_L4_PERIPHERAL_VBASE - OMAP_L4_PERIPHERAL_BASE; uint32_t scu_cfg = bus_space_read_4(&omap_bs_tag, scu_bh, SCU_CFG); arm_cpu_max = 1 + (scu_cfg & SCU_CFG_CPUMAX); beagle_putchar('s'); #endif #endif /* OMAP_4XXX */ #if defined(TI_AM335X) && defined(VERBOSE_INIT_ARM) am335x_cpu_clk(); // find our CPU speed. #endif #if 1 beagle_putchar('h'); #endif printf("\nuboot arg = %#x, %#x, %#x, %#x\n", uboot_args[0], uboot_args[1], uboot_args[2], uboot_args[3]); #ifdef KGDB kgdb_port_init(); #endif cpu_reset_address = beagle_reset; #ifdef VERBOSE_INIT_ARM /* Talk to the user */ printf("\nNetBSD/evbarm (beagle) booting ...\n"); #endif #ifdef BOOT_ARGS char mi_bootargs[] = BOOT_ARGS; parse_mi_bootargs(mi_bootargs); #endif #ifdef VERBOSE_INIT_ARM printf("initarm: Configuring system ...\n"); #endif #if !defined(CPU_CORTEXA8) printf("initarm: cbar=%#x\n", armreg_cbar_read()); #endif /* * Set up the variables that define the availability of physical * memory. */ #if defined(OMAP_3XXX) ram_size = omap3_memprobe(); #endif #if defined(OMAP_4XXX) || defined(OMAP_5XXX) || defined(TI_AM335X) ram_size = emif_memprobe(); #endif #ifdef __HAVE_MM_MD_DIRECT_MAPPED_PHYS if (ram_size > KERNEL_VM_BASE - KERNEL_BASE) { printf("%s: dropping RAM size from %luMB to %uMB\n", __func__, (unsigned long) (ram_size >> 20), (KERNEL_VM_BASE - KERNEL_BASE) >> 20); ram_size = KERNEL_VM_BASE - KERNEL_BASE; } #endif /* * If MEMSIZE specified less than what we really have, limit ourselves * to that. */ #ifdef MEMSIZE if (ram_size == 0 || ram_size > (unsigned)MEMSIZE * 1024 * 1024) ram_size = (unsigned)MEMSIZE * 1024 * 1024; #else KASSERTMSG(ram_size > 0, "RAM size unknown and MEMSIZE undefined"); #endif /* Fake bootconfig structure for the benefit of pmap.c. */ bootconfig.dramblocks = 1; bootconfig.dram[0].address = KERNEL_BASE_PHYS & -0x400000; bootconfig.dram[0].pages = ram_size / PAGE_SIZE; #ifdef __HAVE_MM_MD_DIRECT_MAPPED_PHYS const bool mapallmem_p = true; KASSERT(ram_size <= KERNEL_VM_BASE - KERNEL_BASE); #else const bool mapallmem_p = false; #endif KASSERT((armreg_pfr1_read() & ARM_PFR1_SEC_MASK) != 0); arm32_bootmem_init(bootconfig.dram[0].address, ram_size, KERNEL_BASE_PHYS); arm32_kernel_vm_init(KERNEL_VM_BASE, ARM_VECTORS_LOW, 0, devmap, mapallmem_p); #ifdef __HAVE_MM_MD_DIRECT_MAPPED_PHYS /* "bootargs" env variable is passed as 4th argument to kernel */ if (uboot_args[3] - 0x80000000 < ram_size) { strlcpy(bootargs, (char *)uboot_args[3], sizeof(bootargs)); } #endif boot_args = bootargs; parse_mi_bootargs(boot_args); /* we've a specific device_register routine */ evbarm_device_register = beagle_device_register; db_trap_callback = beagle_db_trap; return initarm_common(KERNEL_VM_BASE, KERNEL_VM_SIZE, NULL, 0); } static void init_clocks(void) { #ifdef NOTYET static volatile uint32_t * const clksel_reg = (volatile uint32_t *) (OMAP3530_L4_WAKEUP_VBASE + OMAP2_CM_BASE + OMAP2_CM_CLKSEL_MPU - OMAP3530_L4_WAKEUP_BASE); uint32_t v; beagle_putchar('E'); v = *clksel_reg; beagle_putchar('F'); if (v != OMAP3530_CM_CLKSEL_MPU_FULLSPEED) { printf("Changed CPU speed from half (%d) ", v); *clksel_reg = OMAP3530_CM_CLKSEL_MPU_FULLSPEED; printf("to full speed.\n"); } beagle_putchar('G'); #endif } #if NCOM > 0 #ifndef CONSADDR #error Specify the address of the console UART with the CONSADDR option. #endif #ifndef CONSPEED #define CONSPEED 115200 #endif #ifndef CONMODE #define CONMODE ((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8) /* 8N1 */ #endif static const bus_addr_t consaddr = CONSADDR; static const int conspeed = CONSPEED; static const int conmode = CONMODE; #endif void consinit(void) { #if NCOM > 0 bus_space_handle_t bh; #endif static int consinit_called = 0; if (consinit_called != 0) return; consinit_called = 1; beagle_putchar('e'); #if NCOM > 0 if (bus_space_map(&omap_a4x_bs_tag, consaddr, OMAP_COM_SIZE, 0, &bh)) panic("Serial console can not be mapped."); if (comcnattach(&omap_a4x_bs_tag, consaddr, conspeed, OMAP_COM_FREQ, COM_TYPE_NORMAL, conmode)) panic("Serial console can not be initialized."); bus_space_unmap(&omap_a4x_bs_tag, bh, OMAP_COM_SIZE); #endif #if NUKBD > 0 if (use_fb_console) ukbd_cnattach(); /* allow USB keyboard to become console */ #endif beagle_putchar('f'); beagle_putchar('g'); } void beagle_reset(void) { #if defined(OMAP_4XXX) *(volatile uint32_t *)(OMAP_L4_CORE_VBASE + (OMAP_L4_WAKEUP_BASE - OMAP_L4_CORE_BASE) + OMAP4_PRM_RSTCTRL) = OMAP4_PRM_RSTCTRL_WARM; #elif defined(OMAP_5XXX) *(volatile uint32_t *)(OMAP_L4_CORE_VBASE + (OMAP_L4_WAKEUP_BASE - OMAP_L4_CORE_BASE) + OMAP5_PRM_RSTCTRL) = OMAP4_PRM_RSTCTRL_COLD; #elif defined(TI_AM335X) *(volatile uint32_t *)(OMAP_L4_CORE_VBASE + (OMAP2_CM_BASE - OMAP_L4_CORE_BASE) + AM335X_PRCM_PRM_DEVICE + PRM_RSTCTRL) = RST_GLOBAL_WARM_SW; #else #if NPRCM > 0 prcm_cold_reset(); #endif #if NOMAPWDT32K > 0 omapwdt32k_reboot(); #endif #endif } #ifdef KGDB #ifndef KGDB_DEVADDR #error Specify the address of the kgdb UART with the KGDB_DEVADDR option. #endif #ifndef KGDB_DEVRATE #define KGDB_DEVRATE 115200 #endif #ifndef KGDB_DEVMODE #define KGDB_DEVMODE ((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8) /* 8N1 */ #endif static const vaddr_t comkgdbaddr = KGDB_DEVADDR; static const int comkgdbspeed = KGDB_DEVRATE; static const int comkgdbmode = KGDB_DEVMODE; void static kgdb_port_init(void) { static int kgdbsinit_called = 0; if (kgdbsinit_called != 0) return; kgdbsinit_called = 1; bus_space_handle_t bh; if (bus_space_map(&omap_a4x_bs_tag, comkgdbaddr, OMAP_COM_SIZE, 0, &bh)) panic("kgdb port can not be mapped."); if (com_kgdb_attach(&omap_a4x_bs_tag, comkgdbaddr, comkgdbspeed, OMAP_COM_FREQ, COM_TYPE_NORMAL, comkgdbmode)) panic("KGDB uart can not be initialized."); bus_space_unmap(&omap_a4x_bs_tag, bh, OMAP_COM_SIZE); } #endif #if defined(OMAP_3XXX) || defined(TI_DM37XX) void omap3_cpu_clk(void) { const vaddr_t prm_base = OMAP2_PRM_BASE + OMAP_L4_CORE_VOFFSET; const uint32_t prm_clksel = *(volatile uint32_t *)(prm_base + PLL_MOD + OMAP3_PRM_CLKSEL); static const uint32_t prm_clksel_freqs[] = OMAP3_PRM_CLKSEL_FREQS; const uint32_t sys_clk = prm_clksel_freqs[__SHIFTOUT(prm_clksel, OMAP3_PRM_CLKSEL_CLKIN)]; const vaddr_t cm_base = OMAP2_CM_BASE - OMAP_L4_CORE_BASE + OMAP_L4_CORE_VBASE; const uint32_t dpll1 = *(volatile uint32_t *)(cm_base + OMAP3_CM_CLKSEL1_PLL_MPU); const uint32_t dpll2 = *(volatile uint32_t *)(cm_base + OMAP3_CM_CLKSEL2_PLL_MPU); const uint32_t m = __SHIFTOUT(dpll1, OMAP3_CM_CLKSEL1_PLL_MPU_DPLL_MULT); const uint32_t n = __SHIFTOUT(dpll1, OMAP3_CM_CLKSEL1_PLL_MPU_DPLL_DIV); const uint32_t m2 = __SHIFTOUT(dpll2, OMAP3_CM_CLKSEL2_PLL_MPU_DPLL_CLKOUT_DIV); /* * MPU_CLK supplies ARM_FCLK which is twice the CPU frequency. */ curcpu()->ci_data.cpu_cc_freq = ((sys_clk * m) / ((n + 1) * m2 * 2)) * OMAP3_PRM_CLKSEL_MULT; omap_sys_clk = sys_clk * OMAP3_PRM_CLKSEL_MULT; } #endif /* OMAP_3XXX || TI_DM37XX */ #if defined(OMAP_4XXX) || defined(OMAP_5XXX) void omap4_cpu_clk(void) { const vaddr_t prm_base = OMAP2_PRM_BASE + OMAP_L4_CORE_VOFFSET; const vaddr_t cm_base = OMAP2_CM_BASE + OMAP_L4_CORE_VOFFSET; static const uint32_t cm_clksel_freqs[] = OMAP4_CM_CLKSEL_FREQS; const uint32_t prm_clksel = *(volatile uint32_t *)(prm_base + OMAP4_CM_SYS_CLKSEL); const u_int clksel = __SHIFTOUT(prm_clksel, OMAP4_CM_SYS_CLKSEL_CLKIN); const uint32_t sys_clk = cm_clksel_freqs[clksel]; const uint32_t dpll1 = *(volatile uint32_t *)(cm_base + OMAP4_CM_CLKSEL_DPLL_MPU); const uint32_t dpll2 = *(volatile uint32_t *)(cm_base + OMAP4_CM_DIV_M2_DPLL_MPU); const uint32_t m = __SHIFTOUT(dpll1, OMAP4_CM_CLKSEL_DPLL_MPU_DPLL_MULT); const uint32_t n = __SHIFTOUT(dpll1, OMAP4_CM_CLKSEL_DPLL_MPU_DPLL_DIV); const uint32_t m2 = __SHIFTOUT(dpll2, OMAP4_CM_DIV_M2_DPLL_MPU_DPLL_CLKOUT_DIV); /* * MPU_CLK supplies ARM_FCLK which is twice the CPU frequency. */ curcpu()->ci_data.cpu_cc_freq = ((sys_clk * 2 * m) / ((n + 1) * m2)) * OMAP4_CM_CLKSEL_MULT / 2; omap_sys_clk = sys_clk * OMAP4_CM_CLKSEL_MULT; printf("%s: %"PRIu64": sys_clk=%u m=%u n=%u (%u) m2=%u mult=%u\n", __func__, curcpu()->ci_data.cpu_cc_freq, sys_clk, m, n, n+1, m2, OMAP4_CM_CLKSEL_MULT); #if defined(CPU_CORTEXA15) if ((armreg_pfr1_read() & ARM_PFR1_GTIMER_MASK) != 0) { beagle_putchar('0'); uint32_t voffset = OMAP_L4_PERIPHERAL_VBASE - OMAP_L4_PERIPHERAL_BASE; uint32_t frac1_reg = OMAP5_PRM_FRAC_INCREMENTER_NUMERATOR; uint32_t frac2_reg = OMAP5_PRM_FRAC_INCREMENTER_DENUMERATOR_RELOAD; uint32_t frac1 = *(volatile uint32_t *)(frac1_reg + voffset); beagle_putchar('1'); uint32_t frac2 = *(volatile uint32_t *)(frac2_reg + voffset); beagle_putchar('2'); uint32_t numer = __SHIFTOUT(frac1, PRM_FRAC_INCR_NUM_SYS_MODE); uint32_t denom = __SHIFTOUT(frac2, PRM_FRAC_INCR_DENUM_DENOMINATOR); uint32_t freq = (uint64_t)omap_sys_clk * numer / denom; #if 1 if (freq != OMAP5_GTIMER_FREQ) { static uint16_t numer_demon[8][2] = { { 0, 0 }, /* not used */ { 26 * 64, 26 * 125 }, /* 12.0Mhz */ { 2 * 768, 2 * 1625 }, /* 13.0Mhz */ { 0, 0 }, /* 16.8Mhz (not used) */ { 130 * 8, 130 * 25 }, /* 19.2Mhz */ { 2 * 384, 2 * 1625 }, /* 26.0Mhz */ { 3 * 256, 3 * 1125 }, /* 27.0Mhz */ { 130 * 4, 130 * 25 }, /* 38.4Mhz */ }; if (numer_demon[clksel][0] != numer) { frac1 &= ~PRM_FRAC_INCR_NUM_SYS_MODE; frac1 |= numer_demon[clksel][0]; } if (numer_demon[clksel][1] != denom) { frac2 &= ~PRM_FRAC_INCR_DENUM_DENOMINATOR; frac2 |= numer_demon[clksel][1]; } *(volatile uint32_t *)(frac1_reg + voffset) = frac1; *(volatile uint32_t *)(frac2_reg + voffset) = frac2 | PRM_FRAC_INCR_DENUM_RELOAD; freq = OMAP5_GTIMER_FREQ; } #endif beagle_putchar('3'); #if 0 if (gtimer_freq != freq) { armreg_cnt_frq_write(freq); // secure only } #endif omap5_cnt_frq = freq; beagle_putchar('4'); } #endif } #endif /* OMAP_4XXX || OMAP_5XXX */ #if defined(OMAP_4XXX) || defined(OMAP_5XXX) || defined(TI_AM335X) static inline uint32_t emif_read_sdram_config(vaddr_t emif_base) { #ifdef CPU_CORTEXA15 return 0x61851b32; // XXX until i figure out why deref emif_base dies #else emif_base += EMIF_SDRAM_CONFIG; //printf("%s: sdram_config @ %#"PRIxVADDR" = ", __func__, emif_base); uint32_t v = *(const volatile uint32_t *)(emif_base); //printf("%#x\n", v); return v; #endif } static psize_t emif_memprobe(void) { uint32_t sdram_config = emif_read_sdram_config(OMAP_EMIF1_VBASE); psize_t memsize = 1L; #if defined(TI_AM335X) /* * The original bbone's u-boot misprograms the EMIF so correct it * if we detect if it has the wrong value. */ if (sdram_config == 0x41805332) sdram_config -= __SHIFTIN(1, SDRAM_CONFIG_RSIZE); #endif #ifdef OMAP_EMIF2_VBASE /* * OMAP4 and OMAP5 have two EMIFs so if the 2nd one is configured * like the first, we have twice the memory. */ const uint32_t sdram_config2 = emif_read_sdram_config(OMAP_EMIF2_VBASE); if (sdram_config2 == sdram_config) memsize <<= 1; #endif const u_int ebank = __SHIFTOUT(sdram_config, SDRAM_CONFIG_EBANK); const u_int ibank = __SHIFTOUT(sdram_config, SDRAM_CONFIG_IBANK); const u_int rsize = 9 + __SHIFTOUT(sdram_config, SDRAM_CONFIG_RSIZE); const u_int pagesize = 8 + __SHIFTOUT(sdram_config, SDRAM_CONFIG_PAGESIZE); const u_int width = 2 - __SHIFTOUT(sdram_config, SDRAM_CONFIG_WIDTH); #ifdef TI_AM335X KASSERT(ebank == 0); // No chip selects on Sitara #endif memsize <<= (ebank + ibank + rsize + pagesize + width); #ifdef VERBOSE_INIT_ARM printf("sdram_config = %#x, memsize = %uMB\n", sdram_config, (u_int)(memsize >> 20)); #endif return memsize; } #endif #if defined(OMAP_3XXX) #define SDRC_MCFG(p) (0x80 + (0x30 * (p))) #define SDRC_MCFG_MEMSIZE(m) ((((m) & __BITS(8,17)) >> 8) * 2) static psize_t omap3_memprobe(void) { const vaddr_t gpmc_base = OMAP_SDRC_VBASE; const uint32_t mcfg0 = *(volatile uint32_t *)(gpmc_base + SDRC_MCFG(0)); const uint32_t mcfg1 = *(volatile uint32_t *)(gpmc_base + SDRC_MCFG(1)); printf("mcfg0 = %#x, size %lld\n", mcfg0, SDRC_MCFG_MEMSIZE(mcfg0)); printf("mcfg1 = %#x, size %lld\n", mcfg1, SDRC_MCFG_MEMSIZE(mcfg1)); return (SDRC_MCFG_MEMSIZE(mcfg0) + SDRC_MCFG_MEMSIZE(mcfg1)) * 1024 * 1024; } #endif /* * EDID can be read from DVI-D (HDMI) port on BeagleBoard from * If EDID data is present, this function fills in the supplied edid_buf * and returns true. Otherwise, it returns false and the contents of the * buffer are undefined. */ static bool beagle_read_edid(uint8_t *edid_buf, size_t edid_buflen) { #if defined(OMAP_3530) i2c_tag_t ic = NULL; uint8_t reg; int error; /* On Beagleboard, EDID is accessed using I2C2 ("omapiic2"). */ extern i2c_tag_t omap3_i2c_get_tag(device_t); ic = omap3_i2c_get_tag(device_find_by_xname("omapiic2")); if (ic == NULL) return false; iic_acquire_bus(ic, 0); for (reg = DDC_EDID_START; reg < edid_buflen; reg++) { error = iic_exec(ic, I2C_OP_READ_WITH_STOP, DDC_ADDR, ®, sizeof(reg), &edid_buf[reg], 1, 0); if (error) break; } iic_release_bus(ic, 0); return error == 0 ? true : false; #else return false; #endif } void beagle_device_register(device_t self, void *aux) { prop_dictionary_t dict = device_properties(self); if (device_is_a(self, "armperiph") && device_is_a(device_parent(self), "mainbus")) { /* * XXX KLUDGE ALERT XXX * The iot mainbus supplies is completely wrong since it scales * addresses by 2. The simpliest remedy is to replace with our * bus space used for the armcore registers (which armperiph uses). */ struct mainbus_attach_args * const mb = aux; mb->mb_iot = &omap_bs_tag; return; } #ifdef CPU_CORTEXA9 /* * We need to tell the A9 Global/Watchdog Timer * what frequency it runs at. */ if (device_is_a(self, "a9tmr") || device_is_a(self, "a9wdt")) { /* * This clock always runs at (arm_clk div 2) and only goes * to timers that are part of the A9 MP core subsystem. */ prop_dictionary_set_uint32(dict, "frequency", curcpu()->ci_data.cpu_cc_freq / 2); return; } #endif #ifdef CPU_CORTEXA15 if (device_is_a(self, "armgtmr")) { /* * The frequency of the generic timer was figured out when * determined the cpu frequency. */ prop_dictionary_set_uint32(dict, "frequency", omap5_cnt_frq); } #endif if (device_is_a(self, "ehci")) { #if defined(OMAP_3530) /* XXX Beagleboard specific port configuration */ prop_dictionary_set_uint16(dict, "nports", 3); prop_dictionary_set_cstring(dict, "port0-mode", "none"); prop_dictionary_set_cstring(dict, "port1-mode", "phy"); prop_dictionary_set_cstring(dict, "port2-mode", "none"); prop_dictionary_set_bool(dict, "phy-reset", true); prop_dictionary_set_int16(dict, "port0-gpio", -1); prop_dictionary_set_int16(dict, "port1-gpio", 147); prop_dictionary_set_bool(dict, "port1-gpioval", true); prop_dictionary_set_int16(dict, "port2-gpio", -1); prop_dictionary_set_uint16(dict, "dpll5-m", 443); prop_dictionary_set_uint16(dict, "dpll5-n", 11); prop_dictionary_set_uint16(dict, "dpll5-m2", 4); #endif #if defined(TI_DM37XX) /* XXX Beagleboard specific port configuration */ prop_dictionary_set_uint16(dict, "nports", 3); prop_dictionary_set_cstring(dict, "port0-mode", "none"); prop_dictionary_set_cstring(dict, "port1-mode", "phy"); prop_dictionary_set_cstring(dict, "port2-mode", "none"); prop_dictionary_set_bool(dict, "phy-reset", true); prop_dictionary_set_int16(dict, "port0-gpio", -1); prop_dictionary_set_int16(dict, "port1-gpio", 56); prop_dictionary_set_bool(dict, "port1-gpioval", true); prop_dictionary_set_int16(dict, "port2-gpio", -1); #if 0 prop_dictionary_set_uint16(dict, "dpll5-m", 443); prop_dictionary_set_uint16(dict, "dpll5-n", 11); prop_dictionary_set_uint16(dict, "dpll5-m2", 4); #endif #endif #if defined(OMAP_4430) prop_dictionary_set_uint16(dict, "nports", 2); prop_dictionary_set_bool(dict, "phy-reset", false); prop_dictionary_set_cstring(dict, "port0-mode", "none"); prop_dictionary_set_int16(dict, "port0-gpio", -1); prop_dictionary_set_cstring(dict, "port1-mode", "phy"); prop_dictionary_set_int16(dict, "port1-gpio", 62); prop_dictionary_set_bool(dict, "port1-gpioval", true); omap2_gpio_ctl(1, GPIO_PIN_OUTPUT); omap2_gpio_write(1, 1); // Power Hub #endif #if defined(OMAP_5430) prop_dictionary_set_uint16(dict, "nports", 3); prop_dictionary_set_cstring(dict, "port0-mode", "none"); prop_dictionary_set_int16(dict, "port0-gpio", -1); prop_dictionary_set_cstring(dict, "port1-mode", "hsic"); prop_dictionary_set_int16(dict, "port1-gpio", -1); prop_dictionary_set_cstring(dict, "port2-mode", "hsic"); prop_dictionary_set_int16(dict, "port2-gpio", -1); #endif #if defined(OMAP_5430) bus_space_tag_t iot = &omap_bs_tag; bus_space_handle_t ioh; omap2_gpio_ctl(80, GPIO_PIN_OUTPUT); omap2_gpio_write(80, 0); prop_dictionary_set_uint16(dict, "nports", 1); prop_dictionary_set_cstring(dict, "port0-mode", "hsi"); #if 0 prop_dictionary_set_bool(dict, "phy-reset", true); prop_dictionary_set_int16(dict, "port0-gpio", 80); prop_dictionary_set_bool(dict, "port0-gpioval", true); #endif int rv = bus_space_map(iot, OMAP5_CM_CTL_WKUP_REF_CLK0_OUT_REF_CLK1_OUT, 4, 0, &ioh); KASSERT(rv == 0); uint32_t v = bus_space_read_4(iot, ioh, 0); v &= 0xffff; v |= __SHIFTIN(OMAP5_CM_CTL_WKUP_MUXMODE1_REF_CLK1_OUT, OMAP5_CM_CTL_WKUP_MUXMODE1); bus_space_write_4(iot, ioh, 0, v); bus_space_unmap(iot, ioh, 4); omap2_gpio_write(80, 1); #endif return; } if (device_is_a(self, "sdhc")) { #if defined(OMAP_3430) || defined(OMAP_3530) prop_dictionary_set_uint32(dict, "clkmask", 0); prop_dictionary_set_bool(dict, "8bit", true); #endif #if defined(TI_AM335X) struct obio_attach_args * const obio = aux; if (obio->obio_addr == SDMMC2_BASE_TIAM335X) prop_dictionary_set_bool(dict, "8bit", true); #endif return; } if (device_is_a(self, "omapfb")) { if (beagle_read_edid(beagle_edid, sizeof(beagle_edid))) { prop_dictionary_set(dict, "EDID", prop_data_create_data(beagle_edid, sizeof(beagle_edid))); } if (use_fb_console) prop_dictionary_set_bool(dict, "is_console", true); return; } #if defined(TI_AM335X) if (device_is_a(self, "tifb")) { static const struct tifb_panel_info default_panel_info = { .panel_tft = 1, .panel_mono = false, .panel_bpp = 24, .panel_pxl_clk = 30000000, .panel_width = 800, .panel_height = 600, .panel_hfp = 0, .panel_hbp = 47, .panel_hsw = 47, .panel_vfp = 0, .panel_vbp = 10, .panel_vsw = 2, .panel_invert_hsync = 1, .panel_invert_vsync = 1, .panel_ac_bias = 255, .panel_ac_bias_intrpt = 0, .panel_dma_burst_sz = 16, .panel_fdd = 0x80, .panel_sync_edge = 0, .panel_sync_ctrl = 1, .panel_invert_pxl_clk = 0, }; prop_data_t panel_info; panel_info = prop_data_create_data_nocopy(&default_panel_info, sizeof(struct tifb_panel_info)); KASSERT(panel_info != NULL); prop_dictionary_set(dict, "panel-info", panel_info); prop_object_release(panel_info); if (use_fb_console) prop_dictionary_set_bool(dict, "is_console", true); return; } #endif if (device_is_a(self, "com")) { if (use_fb_console) prop_dictionary_set_bool(dict, "is_console", false); } #if defined(TI_AM335X) if (device_is_a(self, "tps65217pmic")) { extern const char *mpu_supply; mpu_supply = "DCDC2"; } #endif }