# $NetBSD: envsys.conf,v 1.12 2008/04/26 13:02:35 xtraeme Exp $ # # ---------------------------------------------------------------------- # Configuration file for envstat(8) and the envsys(4) framework. # ---------------------------------------------------------------------- # # Devices are specified in the first block, sensors in the second block, # and properties inside of the sensor block: # # foo0 { # prop0 = value; # sensor0 { ... } # } # # Properties must be separated by a semicolon character and assigned by # using the equal character: # # critical-capacity = 10; # # Please see the envsys.conf(5) manual page for a detailed explanation. # # ---------------------------------------------------------------------- # CONFIGURATION PROPERTIES FOR SPECIFIC DRIVERS AND MOTHERBOARDS # ---------------------------------------------------------------------- # # The following configuration blocks will report the correct # values for the specified motherboard and driver. If you have # a different motherboard and verified the values are not correct # please email me at . # # ------------------------------ # ASUS M2N-E (IT8712F Super I/O) # ------------------------------ # # itesio0 { # # Fixup rfact for the VCORE_A sensor. # sensor3 { rfact = 1800000; } # # # Fixup rfact and change description (VCORE_B = +3.3V). # sensor4 { description = "+3.3 Voltage"; rfact = 2000000; } # # # Change description (+3.3V, unused sensor). # sensor5 { description = "Unused"; } # # # Fixup rfact and change description for the +5V sensor. # sensor6 { description = "+5 Voltage"; rfact = 3490000; } # # # Fixup rfact and change description for the +12V sensor. # sensor7 { description = "+12 Voltage"; rfact = 8500000; } # } # # -------------------------------------- # Gigabyte P35C-DS3R (IT8718F Super I/O) # -------------------------------------- # # itesio0 { # # Fixup rfact and change description for the VCore sensor. # sensor3 { description = "VCore Voltage"; rfact = 1000000; } # # # Change description (VCORE_B is DDR). # sensor4 { description = "DDR Voltage"; } # # # Fixup rfact and change description for the +12V sensor. # sensor7 { description = "+12 Voltage"; rfact = 116000000; } # # # Fixup rfact for the -12V sensor. # sensor9 { rfact = 9000000; } # }